Distributor Program

WHY US  /  CUSTOM ENGINEERING

Your Spec, Our Platform

Change the head to match the motion. Change the base to match the environment. Change the core to match the electrical load. Designed, manufactured, and tested under one roof. You receive a switch built to your exact requirements.

Discuss Your Requirements

Built In House

Send us your specification. It moves from engineer to production line inside one building. Your custom switch arrives fast and fits first time.

See How We Build

THREE DIMENSIONS

Every Switch Is A Combination Of Three Independent Layers

Each layer solves a different problem. You choose what matters for your application.

Every application is different. Our engineering team helps you find the right combination before you order.

Talk to an Engineer
What The Machine Touches

The Head Determines How The Switch Is Triggered

Same core, same housing. Swap the head for a different kind of contact. A roller plunger for a cam. A push button for a panel. A thin wire tip for tight spaces. A roller arm for sweeping motions. Each head answers one question: what is touching this switch, and from which direction.

The Housing Determines What The Switch Can Survive

Same core, same head. Swap the housing for a different level of protection. Full metal for outdoor cranes and heavy vibration. Metal base with ABS shell for mid-range industrial conditions. Reinforced plastic for clean indoor automation. Each grade answers one question: what is this switch up against.

The Core Determines What The Switch Can Carry

Same base, same head. Swap the core for a different electrical rating. Current capacity, contact configuration, terminal type, each changes at this level. Most customers never touch this layer. We select the right core based on your electrical parameters. The third axis of the platform. When your application needs it, it is ready.

The Story Behind the Components

Two Problems Where A Standard Off The Shelf Part Was The Wrong Answer

A Cable Gland That Holds A Permanent Bend

Elevator shafts leave little room for wiring. Standard NBR rubber hardens and splits after years of tight-radius bending. We formulated a custom compound for the TZ-8 series, thicker and more flexible, so the gland stays sealed at any bend angle.
Explore TZ-8 Limit Switches
A Cable Gland That Holds A Permanent Bend

A Toggle Handle That Still Moves After Five Years Of Waiting

An elevator lobby fire alarm toggle may sit untouched for five years. An iron handle rusts in place. When someone pulls the alarm, it snaps or sticks. Every T5 toggle handle is copper-nickel alloy. It costs more. It stays clean. Five years after installation, the handle still moves.
Explore T5 Toggle Switches
A Toggle Handle That Still Moves After Five Years Of Waiting

HOW IT WORKS

From Your Specification To A Switch Ready To Install

You describe your application.

Machine type, mounting position, environmental conditions, and electrical requirements.

We match the right platform combination.

Head type for the trigger, housing grade for the environment, core configuration for the load.

We adjust what needs adjusting.

Actuator geometry, operating force, travel distance, cable length. Every parameter can be tuned to your specification.

We pre-assemble and pre-adjust.

Your switches arrive configured to your spec. Unpack. Mount. Wire. No field adjustment required.

You receive a switch ready to install.

Documentation, test data, and dimensional drawings ship with every custom order.

CUSTOM ENGINEERING

Tell Us About Your Application

Our engineering team responds within 48 hours with a recommendation.

Talk to an Engineer